The ZZ-2OD-50DDC is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The 2OD-50DDC offers the protection needed for any severe outdoor environment. The 2OD-50DDC is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration.
Ultimate security is provided by a three point locking system, which utilizes a NEMA stainless steel cabinets, the 2OD-50DDC, made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the 2OD-50DDC is the ultimate solution.
Features
Alumishield
Top cover, shades cabinet from the sun
Handles
Stainless steel - NEMA
Rails
Fully adjustable & alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
30 bottom louvers per door
24 top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
24 fixed filter pads in top cover
Handles
Stainless steel, padlocking
Exterior Screws
Stainless with NEMA washers & nylon locking
nuts
Racking Specifications
Rails
Four Sets Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
50 inches
Useable Depth
Maximum: 30.50" Minimum 28.75" (See below)
*Section Starting & Ending Points
Vertical Height Per section
Effective Depth For Each Section
Top
46.75" - 50.00"
3.25"
30.50"
46.57" - 46.75"
.18"
29.50"
31.00"- 46.57"
15.57
30.50"
Center
19.00"-31.00"
12.00"
28.75"
3.43"-19.00"
15.57
30.50"
3.25" - 3.43"
.18"
29.50"
Bottom
0.00" - 3.25"
3.25"
30.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (50.00")
