OEM / Vertical Rack Mount Enclosure Manufacturer
Outdoor, Telcom, Traffic, Wimax, Security Enclosures
Nema 3, 3R, 4, 4X Cabinet Enclosures

800-753-8459

OPEN 8-12, 1-5 CST

Contact Us

About Us

Warranty/Return

READ ABOUT THE MIRACLE

OUTDOOR

EIA 19 or 23" Rackmount

OD-Series

16"H 9RU/RAIL

30"H 17RU/RAIL

46"H 26RU/RAIL

50"H 28RU/RAIL

62"H 35RU/RAIL

78"H 44RU/RAIL

Pole or Wall

10"H 5RU/RAIL

19"H 10RU/RAIL

30"H 17RU/RAIL

2OD-Series

Traffic

36"H 17RU/RAIL

46"H 27RU/RAIL

Battery Box

Pole or Wall Small Box

14"H - 40"H

INDOOR

EIA 19" Rackmount

Outdoor Enclosure / Cabinet 50"H


ZZ-2OD-50DXC 50"H X 51"W X 25"D (19" or 23" Racking) * Painted Cream
INCLUDES AS FOLLOWS (4) - 19" or 23" RACKING RAILS 2 FRONT AND 2 REAR DOORS 3 POINT LOCKING SYSTEM POWDER BACKED ON CREAM PAINT LIFTING HOOKS --------------------------------------------------------------------------------- Request Quote or More Info TheZZ- 2OD-50DX is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The ZZ-2OD-50DX offers the protection needed for any severe outdoor environment. The ZZ-2OD-50DX is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. The ZZ-2OD-50DX made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the ZZ-2OD-50DX is the ultimate solution.

Features

Alumishield	Top cover, shades cabinet from the sun
Handles	Stainless steel - NEMA
Rails	Fully adjustable & alodine coated
Doors	Front and rear secured with three point locks and padlocking handles
Vents	Front & rear, top & bottom, filters supplied

Top Of Page

Specifications

General

Weight

255 lbs. assembled
345 Lbs. Shipping weight

Doors

Four - secured by three point locking system
Locks via customer supplied padlocks
Sealed with 13/16" aluminum filled gaskets

Material

.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous

Vents

30 bottom louvers per door
24 top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
24 fixed filter pads in top cover

Handles

Stainless steel, padlocking

Exterior Screws

Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails

Four Sets Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX)

Spacing

19" EIA STANDARD

Positioning

All rails fully adjustable from front to rear

Useable Height

50 inches

Useable Depth

Maximum: 21.50" Minimum: 19.75" (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	46.75" - 50.00"	3.25"	21.50"
	46.57" - 46.75"	.18"	20.50"
	31.00"- 46.57"	15.57	21.50"

Center	19.00"-31.00"	12.00"	19.75"

	3.43"-19.00"	15.57	21.50"
	3.25" - 3.43"	.18"	20.50"
Bottom	0.00" - 3.25"	3.25"	21.50"