ZZ-2OD-62DDXC-A1
62"H x 51"W x 42"D MAIN ENCLOSURE
16"H x 51"W x 42"D BATTERY ENCLOSURE
TOTAL ENCLOSURE 78"HIGH
4 SETS OF 19" RACKING RAILS (STANDARD)
PAINTED CREAM
2 FRONT AND 2 BACK DOORS
3 POINT LOCKING SYSTEM
LIFTING HOOKS
WINDLOCKS
DOOR ALARM SWITCHES
2 FLUORECENT LIGHTS
2 BATTERY COMPARTMENTS (EACH TRAY 18 3/4"W X 37"D)
2 = F-25-115T FAN KIT FOR AIR CIRCULATION IN BTTERY BOX
SIDE FIBER OR CABLE SPOOL UP BOX (72"H X 16"W X 12"D)
100 AMP LOAD CENTER W/ 4 POPULATED 4 SQUARE OUTLETS INSTALLED
2 - 6000 AIRCONDTIONERS 110vCLICK HERE FOR SPECS ON A/C
The ZZ-2OD-62DDXC-A1 is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The ZZ-2OD-62DDXC-A1 offers the protection needed for any severe outdoor environment. The 2OD-62DDXC-A1 is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration.
Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. The ZZ-2OD-62DDXC-A1 made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the ZZ-2OD-62DDXC-A1 is the ultimate solution.
Features
Alumishield
Top cover, shades cabinet from the sun
Handles
Stainless steel - NEMA
Rails
4 Sets of Fully adjustable & alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
Four Sets Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
62 inches
Useable Depth
Maximum: 38 1/2" Minimum 36 3/4" (See
below)
*Section Starting & Ending Points
Vertical Height Per section
Effective Depth For Each Section
Top
74.75" - 78.00"
3.25"
38.50"
74.57" - 74.75"
.18"
37.50"
45.00" - 74.57"
29.57"
38.50"
Center
33.00" - 45.00"
12.00"
36.75"
3.43"-33.00"
29.57"
38.50"
3.25" - 3.43"
.18"
37.50"
Bottom
0.00" - 3.25"
3.25"
38.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (62.00")
