The ZZ-2OD-62DX is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The ZZ-2OD-62DX offers the protection needed for any severe outdoor environment. The 2OD-62DX is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMASHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration.
Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. The ZZ-2OD-62DX made of ALUMIFLEX will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the ZZ-2OD-62DX is the ultimate solution.
Features
Alumishield
Top cover, shades cabinet from the sun
Handles
Stainless steel - NEMA
Rails
Fully adjustable & alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
30 bottom louvers per door
24 top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
24 fixed filter pads in top cover
Handles
Stainless steel
Lifting Hooks
Four Standard
Exterior Screws
Stainless steel with NEMA washers & nylon locking
nuts
Racking Specifications
Rails
Four sets standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 Material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
62 inches
Useable Depth
Maximum: 21.50" Minimum: 19.75" (See
below)
*Section Starting & Ending Points
Vertical Height Per section
Effective Depth For Each Section
Top
58.75" - 62.00"
3.25"
21.50"
58.57" - 58.75"
.18"
20.50"
37.00" - 58.57"
21.57
21.50"
Center
25.00" - 37.00"
12.00"
19.75"
3.43"-25.00"
21.57
21.50"
3.25" - 3.43"
.18"
20.50"
Bottom
0.00" - 3.25"
3.25"
21.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (62.00")
