800-753-8459

8:00 am - 5:00 pm CST

ISO 9001 Certified

Cage Code 385-WIFI

LiveZilla Live Help

OEM / Vertical Rack Mount Enclosure Manufacturer

Telecom, Traffic, Wimax, LTE, Security

Outdoor NEMA 3, 3R, 4, 4X Cabinet Enclosures

Read Reviews Review Score(9)

78”H x 88.5”W x 42”D (252 RU) Triple Bay Outdoor Enclosure

3OD-78DDXC

  • 252 Racking Units Total
  • 3 Front and 3 Rear Doors
  • 3 Point Padlocking Handles
  • 6 Sets of Adjustable 19″ or 23″ Racking Rails
  • Alumishield® Design
  • (C) Painted Cream
  • Lifting Hooks
  • Door Windlocks

This Triple Bay Design is 78″ High and 88″ Wide and 42″ Deep. It comes with Six Sets of Standard 19″ or 23″ 33RU (252 RU’s Total) Racking Rails w/ RU Markings. Standard Racking Hub that will allow you side by side, Triple Racking Bays. Nema Outdoor Wireless LTE/4G/Wimax Triple Bay Racking Enclosure View Other Photos of Triple Door Enclosures

View Other Photos of Triple Door Enclosures CLICK HERE

spacer

(CLICK ON TABS BELOW FOR MORE INFO)

Slide 1

Features

Alumishield®
Top cover, shades cabinet from the sun
Handles
Stainless steel – NEMA
Rails
Fully adjustable & Alodine coated
Doors
3 Front and 3 rear secured with three point locks and padlocking handles
Vents
Front & rear, top & bottom, filters supplied
More Info
Our Triple Bay Design is standardly from 16″H – 90″H and standardly from 25″D – 42″D. It’s the superior design in communication cabinets, being as rigid as steel and yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called Alumiflex®. It offers the protection needed for any severe outdoor environment. It’s constructed of .125″ Alumiflex® material and comes with an additional .125″ Alumishield® top cover, thereby fully protecting your equipment from falling ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. It’s made of Alumiflex®, will operate without affecting, or being affected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today’s complicated zoning requirements. So whether you’re installing a new shelter or adding room to your existing one, It’s the ultimate solution.
Slide 2

Specifications – 3OD-78DDXC – 78″H X 88.5″W X 42″D (252 RU) Triple Bay

Weight
500 lbs. assembled
590 lbs. Shipping weight
Doors
Six – secured by three point locking system
Locks via customer supplied padlocks
Sealed with 13/16″ aluminum filled gaskets
Material
.125″ Alumiflex®
Finish: Flat aluminum
RF properties: Non-ferrous
Vents
Thirty bottom louvers per door
26 top louvers – In top cover-under Alumishield®
One removable filter panel per door
26 fixed filter pads in top cover
Handles
Stainless steel
Lifting Hooks
Eight Standard
Exterior Screws
Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails
Six sets standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS™
.125″ Alumiflex®
Rails will have the face utilizing 19″ racking and the mounting side to utilize 23″ racking. The left rail (19″ rack showing) will have two ground studs attached to the mounting face coming inward. There will be a hole at the top of each face of each rail for an optional ground strap. Rack units will be marked with etching depicting each RU and will have both a hole and etching separating each RU. The rails will be adjusted to fit inside an 3OD cabinet that has an extra 4″ width. The mounting holes will be adjusted to fit the new r-strut configuration. There will be 1.75″ passthrough holes between the RU-03 and the RU-04 marks on the face with the 23″ racking. Another 1.75″ passthrough will be on the face with the 19″ racking between the RU-04 and the RU-05 marks. Use Heyco 28882 snap bushing or equivalent in the 1.75″ cable passthrough holes. Hash Marks will seperate the RU’s.
Spacing
19″ EIA Standard
Positioning
All rails fully adjustable from front to rear
Useable Height
Useable Racking Height Has Been Revised to Only Fit in the Opening of the Door Jam. Which is Cabinet Height Minus 3.75″
Maximum: 73.50″
Total # of Rack Units: 252 42 RU’s per Rail Set
Useable Depth
Maximum: 38 1/2 ” Minimum: 36 3/4″ Per Bay

Door Opening Clearance

Height
73 13/16″
Width
23.625″

Exterior Cabinet Dimensions

Main Body
Width: 88″
Height: 78.25″
Depth: 42.25″
Alumishield®
Width 93 1/2″
Hang down height: 1.75″
Depth: 46.5″
Handles
Protrude 1 7/8″
Total Space Occupied
Width: 88″
Height: 78.5″
Depth: 46″

Inside Clearance – Less Rails

Width
26.6875″ Each Compartment
Height
78″
Depth
See racking specs – useable depth above

Ratings

NEMA Class Types Available
Class 250 // 3R (Vented) // 4 (closed loop-a/c) // 4X
Paint Tested
1000 Hour salt spray
1000 Hour immersion

Warranty

Period
15 Years – Unconditional
Slide 3

Accessory Options

C):
Powder baked on textured paint
R-2-78:
Two extra 78″ rails and mounting hardware
MTDDX:
Mounting tray
CA-4:
Caster kit (4) & mounting hardware
SCR-432:
Rail Screws (4) 10×32

POP3 Options

POP3-1
  • 3 = 6000 BTU Air Conditioner 220 Volts
    with 400 Watts Total Fan Heaters (18K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center
    w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
POP3-2
  • 2 = 8000 BTU Air Conditioner 220 Volts
    with 800 Watts Total Fan Heaters (16K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center
    w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
POP3-3
  • 3 = 6000 BTU Air Conditioner, 220 Volts
    with 400 Watts Total Fan Heaters (18K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center
    w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
  • 3 Seperate Battery Compartment Tray’s for a 2OD
POP3-4
  • 2 = 8000 BTU Air Conditioner 220 Volts
    with 800 Watts Total Fan Heaters (16K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center
    w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
  • Battery Box
  • 3 Seperate Battery Compartment Tray’s for a 2OD
Slide 4

Climate Options

Air Conditioners
Heater Options
AC & DC Fan Kits
Slide 5

Shipping Info

Standard The 3OD-78DDXC is shipped fully assembled.
 

Climate Control  •  Power Distribution  •  Enclosure Construction

DDB Unlimited is an OEM NEMA Outdoor Cabinet Enclosure Manufacturer. We provide adjustable 19" or 23" racking, front and rear doors with 3 point locking system, NEMA 4, 4X, air conditioners, heaters, fans and batteries. Power options are available for our telecommunication enclosures.

Configuration  •  Customization  •  Accessories  •  Customer Service