The IOD-46DXC is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The IOD-46DXC offers the protection needed for any severe outdoor environment. The IOD-46DXC is constructed of .125 ALUMIFLEX material. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles.

Unlike steel cabinets, the IOD-46DXC, made of ALUMIFLEX, will operate without affecting or being effected by RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether your installing a new shelter or adding room to your existing one, the IOD-46DXC is the ultimate solution.

Features

Handles

Stainless steel - NEMA

Rails

(Front and Rear Set) Fully adjustable & alodine coated

Doors

Front and rear secured with three point locks and padlocking handles

Vents

Front & rear, top & bottom, filters supplied

C-40 = Option comes with the following

Flourescent Light

Populated 4 Square

Door Alarm Switch

F-25-115T = Fan Kit w/ Thermostat

Top Of Page

Specifications

General
Weight	132 lbs. assembled 180 Lbs. Shipping weight
Doors	Two removable- secured by three point locking system Locks via customer supplied padlocks sealed with 13/16" aluminum filled gaskets
Material	.125 ALUMIFLEX Finish: Powder Coat Baked on Cream RF properties: Non-ferrous
Vents	30 bottom louvers per door One removable filter panel per door
Handles	Stainless steel, padlocking
Exterior Screws	Stainless steel with NEMA washers & nylon locking nuts
Racking Specifications
Rails	Four standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by three R-STRUTS .125 material (ALUMIFLEX)
Spacing	19" EIA STANDARD
Positioning	All rails fully adjustable from front to rear
Useable Height	46 inches
Useable Depth	Maximum: 26 3/8 Minimum 25 3/4
Removeable Front Door Opening Clearance
Height	41 3/4 inches
Width	19 1/2 inches
Removeable Back Door Opening Clearance
Height	36 3/4 inches
Width	19 1/2 inches
Exterior Cabinet Dimensions
Main Body	Width: 25 1/2 inches Height: 46 1/2 inches Depth: 30 inches
Handles	Protrude 1 7/8 inches
Total Space Occupied	Width: 25 1/2 inches Height: 46 1/2 inches Depth: 33 3/4 inches
Inside Clearance - Less Rails
Width	23 5/8 inches
Height	46 inches
Depth	See racking spec's - useable depth chart above
Ratings
NEMA	Class 250 Type 4
Paint Tested	500 Hour salt spray 500 hour immersion
Warranty
Period	15 Years - Unconditional

Top Of Page

Accessory Options

STR-2-46:	Two extra 46" rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
SCR-432:	Rail Screws (4) 10x32

Top Of Page

Climate Control Options

Air Conditioners	view all options
Heater Options	view all options
AC & DC Fan Kits	view all options

Shipping Information

Standard

The IOD-46DXC is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.

Indoor/Outdoor Cabinet 46"H X 25"W X 30"D

IOD-46DXC

Features

Specifications

General

Racking Specifications

Removeable Front Door Opening Clearance

Removeable Back Door Opening Clearance

Exterior Cabinet Dimensions

Inside Clearance - Less Rails

Ratings

Warranty

Accessory Options

Climate Control Options

Shipping Information

Home | Indoor Racking Enclosures | Outdoor Racking Enclosures Small Enclosures | Accessories | Climate Control | About Us

Home | Indoor Racking Enclosures | Outdoor Racking Enclosures
Small Enclosures | Accessories | Climate Control | About Us