General |
| Weight |
105 lbs. assembled
155 Lbs. Shipping weight |
| Doors |
two - secured by three point locking system
Locks via customer supplied padlocks
Sealed with 13/16" aluminum filled gaskets |
| Material |
.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous |
| Vents |
No Vents |
| Handles |
Stainless steel, padlocking |
| Exterior Screws |
tainless with NEMA washers & nylon locking nuts |
Racking Specifications |
| Rails |
Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by two R-STRUTS
.125 Material (ALUMIFLEX) |
| Spacing |
19" EIA STANDARD |
| Positioning |
All rails fully adjustable from front to rear |
| Useable Height |
30 inches |
| Useable Depth |
Maximum: 30.5" Minimum: 28.75" (See below) |
|
*Section Starting & Ending Points |
Vertical Height Per section |
Effective Depth For Each Section |
| Top |
26.75" - 30.00" |
3.25" |
21.50" |
|
26.57" - 26.75" |
.18" |
29.50" |
|
21.00" - 26.57" |
5.57" |
30.50" |
| |
|
|
|
| Center |
9.00" - 21.00" |
12.00" |
28.75" |
| |
|
|
|
|
3.43" - 9.00" |
5.57" |
30.50" |
|
3.25" - 3.43" |
.18" |
29.50" |
| Bottom |
0.00" - 3.25" |
3.25" |
30.50" |
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (30.00") |
Door Opening Clearance |
| Height |
25 13/16 inches |
| Width |
19 1/2 inches |
Exterior Cabinet Dimensions |
| Main Body |
Width: 25 1/2 inches
Height: 30 1/4 inches
Depth: 34 1/4 inches |
| Alumishield |
Width: 28 inches
Hang down height: 1 3/4 inches
Depth: 36 1/2 inches |
| Handles |
Protrude 1 7/8 inches |
| Total Space Occupied |
Width: 33 inches
Height: 30 1/2 inches
Depth: 38 inches |
Inside Clearance - Less Rails |
| Width |
23 5/8 inches |
| Height |
30 inches |
| Depth |
See racking spec's - useable depth chart above |
Ratings |
| NEMA |
Class 250 Type 4 |
| Paint Tested |
500 Hour salt spray
500 hour immersion |
Warranty |
| Period |
Seven Years - Unconditional |
