OEM Nema Outdoor Cabinet Enclosure Manufacture. Providing Adjustable 19" or 23" Racking. Front and Rear Doors with 3 Point Locking System, NEMA 4, 4X. Air Conditioner's, Heaters, Fans, Batteries, Power options available

Features

Alumishield	Top cover, shades cabinet from the sun
Handles	Stainless steel - NEMA
Rails	Fully adjustable & alodine coated
Doors	Front and rear secured with three point locks and padlocking handles
Vents	Front & rear, top & bottom, filters supplied
Rails	1 set of 19" rails standard

Top Of Page

Specifications

General

Weight

90 lbs. assembled
130 Lbs. Shipping weight

Doors

Two - secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets

Material

.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous

Vents

30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover

Handles

Stainless steel, padlocking

Exterior Screws

Stainless with NEMA washers & nylon locking nuts

Racking Specifications

Rails

One Set Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by two R-STRUTS
.125 material (ALUMIFLEX)

Spacing

19" EIA STANDARD

Positioning

All rails fully adjustable from front to rear

Useable Height

30 inches

Useable Depth

Maximum: 21 1/2" Minimum: 19 3/4" (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	26.75" - 30.00"	3.25"	21.50"
	26.57" - 26.75"	.18"	20.50"
	21.00" - 26.57"	5.57"	21.50"

Center	9.00" - 21.00"	12.00"	19.75"

	3.43" - 9.00"	5.57"	21.50"
	3.25" - 3.43"	.18"	20.50"
Bottom	0.00" - 3.25"	3.25"	21.50"

*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (30.00")

Door Opening Clearance

Height

25 13/16 inches

Width

19 1/2 inches

Exterior Cabinet Dimensions

Main Body

Width: 25 1/2 inches
Height: 30 1/4 inches
Depth: 25 1/4 inches

Alumishield

Width: 28 inches
Hang down height: 1 3/4 inches
Depth: 27 1/2 inches

Handles

Protrude 1 7/8 inches

Total Space Occupied

Width: 28 inches
Height: 30 1/2 inches
Depth: 29 inches

Inside Clearance - Less Rails

Width

23 5/8 inches

Height

30 inches

Depth

See racking spec's - useable depth chart above

Ratings

NEMA

Class 250 Type 4X

Paint Tested

500 Hour salt spray
500 hour immersion

Warranty

Period

15 Years - Unconditional

Top Of Page

Accessory Options

R-2-30:	Two extra 30" rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
SCR-432:	Rail Screws (4) 10x32

Top Of Page

Climate Control Options

Air Conditioners	view all options
Heater Options	view all options
AC & DC Fan Kits	view all options

Shipping Information

Standard

The OD-30DX is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.

Outdoor Enclosure / Cabinet 30"H x 25"D

Features

Specifications

General

Racking Specifications

Door Opening Clearance

Exterior Cabinet Dimensions

Inside Clearance - Less Rails

Ratings

Warranty

Accessory Options

Climate Control Options

Shipping Information

Home | Indoor Racking Enclosures | Outdoor Racking Enclosures Small Enclosures | Accessories | Climate Control | About Us

Home | Indoor Racking Enclosures | Outdoor Racking Enclosures
Small Enclosures | Accessories | Climate Control | About Us