DDB Unlimited Logo
indoor and outdoor nema weatherproof enclosures

Tomorrow's Technology at Today's Prices!

Call us at
800-753-8459

Outdoor Enclosure / Cabinet 25"H x 25"D

OD-30DXC-BAC

30"H X 25"D X 25"W (19" or 23" Racking)

*Painted Cream

Download Now

DOWNLOAD SOLIDWORKS DRAWING

The OD-30DXC is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The OD-30DXC offers the protection needed for any severe outdoor environment. The OD-30DXC is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. The OD-30DXC, made of ALUMIFLEX, will operate without affecting or being effected by RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether your installing a new shelter or adding room to your existing one, the OD-30DXC is the ultimate solution.

Features

Alumishield Top cover, shades cabinet from the sun
Handles Stainless steel - NEMA
Rails Fully adjustable & alodine coated
Doors Front and rear secured with three point locks and padlocking handles
Vents Front & rear, top & bottom, filters supplied

Specifications

General

Weight 220 lbs. assembled
270 Lbs. Shipping weight
Doors Two - secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets
Material .125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous
BAC Configuration comes with the following: 4000 BTU Air CONDITIONER (STANDARD), w/ R3.3 INSULATION, BATTERY BOX ENCLOSURE W/ SLIDE OUT BATTERY TRAY
Handles Stainless steel, padlocking
Exterior Screws Stainless with NEMA washers & nylon locking nuts

Racking Specifications

Rails Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by two R-STRUTS
.125 Material (ALUMIFLEX)
Spacing 19" EIA STANDARD
Positioning All rails fully adjustable from front to rear
Useable Height 30 inches
Useable Depth Maximum: 21 1/2" Minimum: 19 3/4" (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 26.75" - 30.00" 3.25" 21.50"
26.57" - 26.75"  .18" 20.50"
21.00" - 26.57" 5.57" 21.50"
       
Center 9.00" - 21.00" 12.00" 19.75"
       
3.43" - 9.00" 5.57" 21.50"
3.25" - 3.43"  .18" 20.50"
Bottom 0.00" - 3.25" 3.25" 21.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (30.00")

Door Opening Clearance

Height 25 13/16 inches
Width 19 1/2 inches

Exterior Cabinet Dimensions

Main Body Width: 25 1/2 inches
Height: 46 1/4 inches
Depth: 25 1/4 inches
Alumishield Width: 28 1/16 inches
Hang down height: 1 3/4 inches
Depth: 29 inches
Handles Protrude 1 7/8 inches
Total Space Occupied Width: 28 1/16 inches
Height: 46 1/2 inches
Depth: 29 inches

Inside Clearance - Less Rails

Width 23 5/8 inches
Height 30 inches
Depth See racking spec's - useable depth chart above

Ratings

NEMA Class 250 Type 4
Paint Tested 500 Hour salt spray
500 hour immersion

Warranty

Period Seven Years - Unconditional

Accessory Options

R-2-30: Two extra 30" rails and mounting hardware
MTDX: Mounting tray
CA-4: Caster kit (4) & mounting hardware

Climate Control Options

Air Conditioners view all options
Heater Options view all options
AC & DC Fan Kits view all options

Shipping Information

Standard The OD-30DX is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.

Request Quote or More Information

Full Name: (ex: Joe Smith)
Email:
Phone #: (ex: 585-555-1212)
Company:
Question / Comment: