General |
| Weight |
120 lbs. assembled
170 Lbs. Shipping weight |
| Doors |
Two - secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets |
| Material |
.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous |
| Vents |
30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover |
| Handles |
Stainless steel,
padlocking |
| Exterior Screws |
Stainless steel with NEMA washers & nylon locking
nuts |
Racking Specifications |
| Rails |
Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX) |
| Spacing |
19" EIA STANDARD |
| Positioning |
All rails fully adjustable from front to rear |
| Useable Height |
50 inches |
| Useable Depth |
Maximum: 21 1/2" Minimum: 19 3/4" (See
below) |
|
*Section Starting & Ending Points |
Vertical Height Per section |
Effective Depth For Each Section |
| Top |
46.75" - 50.00" |
3.25" |
21.50" |
|
46.57" - 46.75" |
.18" |
20.50" |
|
31.00"- 46.57" |
15.57" |
21.50" |
| |
|
|
|
| Center |
19.00"-31.00" |
12.00" |
19.75" |
| |
|
|
|
|
3.43" - 19.00" |
15.57" |
21.50" |
|
3.25" - 3.43" |
.18" |
20.50" |
| Bottom |
0.00" - 3.25" |
3.25" |
21.50" |
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (50.00") |
Door Opening Clearance |
| Height |
45 13/16 inches |
| Width |
19 1/2 inches |
Exterior Cabinet Dimensions |
| Main Body |
Width: 25 1/2 inches
Height: 50 1/4 inches
Depth: 25 1/4 inches |
| Alumishield |
Width: 28 inches
Hang down height: 1 3/4 inches
Depth: 27 1/2 inches |
| Handles |
Protrude 1 7/8 inches |
| Total Space Occupied |
Width: 28 inches
Height: 50 1/2 inches
Depth: 29 inches |
Inside Clearance - Less Rails |
| Width |
23 5/8 inches |
| Height |
50 inches |
| Depth |
See racking spec's - useable depth chart above |
Ratings |
| NEMA |
Class 250 Type 4
4X = When vents are sealed and plated |
| Paint Tested |
500 Hour salt spray
500 hour immersion |
Warranty |
| Period |
Seven Years - Unconditional |
