OEM Nema Outdoor Cabinet Enclosure Manufacture. Providing Adjustable 19" or 23" Racking. Front and Rear Doors with 3 Point Locking System, NEMA 4, 4X. Air Conditioner's, Heaters, Fans, Batteries, Power options available
Features
Alumishield
Top cover, shades cabinet from the sun
Handles
Stainless steel - NEMA
Rails
Fully adjustable & alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover
Handles
Stainless steel
Exterior Screws
Stainless with NEMA washers & nylon locking
nuts
Racking Specifications
Rails
One Set Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
62 inches
Useable Depth
Maximum: 21 1/2 " Minimum: 19 3/4" (See
below)
*Section Starting & Ending Points
Vertical Height Per section
Effective Depth For Each Section
Top
58.75" - 62.00"
3.25"
21.50"
58.57" - 58.75"
.18"
20.50"
37.00" - 58.57"
21.57
21.50"
Center
19.00"-31.00"
12.00"
19.75"
3.43" - 25.00"
21.57
21.50"
3.25" - 3.43"
.18"
20.50"
Bottom
0.00" - 3.25"
3.25"
21.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (50.00")
