Outdoor Enclosure / Cabinet 78"H x 42 "D

		(Click Below to Download Specs Sheet)

OD-78DDX 78"H X 25"W X 42"D (19" or 23" Racking)	OD-78DDXC 78"H X 25"W X 42"D (19" or 23" Racking) * Painted Cream
DOWNLOAD SOLIDWORKS DRAWING	Request Quote or More Info

Alumishield	Top cover, shades cabinet from the sun
Handles	Stainless steel - NEMA
Rails	Fully adjustable & alodine coated
Doors	Front and rear secured with three point locks and padlocking handles
Vents	Front & rear, top & bottom, filters supplied

General
Weight	251 lbs. assembled 291 lbs. Shipping weight
Doors	Two - secured by three point locking system Locks via customer supplied padlocks sealed with 13/16" aluminum filled gaskets
Material	.125 ALUMIFLEX Finish: Flat aluminum RF properties: Non-ferrous
Vents	30 bottom louvers per door Twelve top louvers - In top cover-under ALUMISHIELD One removable filter panel per door Twelve fixed filter pads in top cover
Handles	Stainless steel
Exterior Screws	Stainless steel with NEMA washers & nylon locking nuts
Racking Specifications
Rails	Two Sets Standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by three R-STRUTS .125 material (ALUMIFLEX)
Spacing	19" EIA STANDARD
Positioning	All rails fully adjustable from front to rear
Useable Height	78 inches
Useable Depth	Maximum: 38.50" Minimum 36.75" (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 74.75" - 78.00" 3.25" 38.50" 74.57" - 74.75"  .18" 37.50" 45.00" - 74.57" 29.57" 38.50"         Center 33.00" - 45.00" 12.00" 36.75"         3.43" - 33.00" 29.57" 38.50" 3.25" - 3.43"  .18" 37.50" Bottom 0.00" - 3.25" 3.25" 38.50" *Section measurements start from the bottom of the cabinet (0.00") & run vertically upward towards the top of the cabinet (78.00")
Door Opening Clearance
Height	73 13/16 inches
Width	19 1/2 inches
Exterior Cabinet Dimensions
Main Body	Width: 25 1/2 inches Height: 78 1/4 inches Depth: 42 1/4 inches
Exterior Cabinet Dimensions
Alumishield	Width: 28 1/16 inches Hang down height: 1 3/4 inches Depth: 44 11/16 inches
Handles	Protrude 1 7/8 inches
Total Space Occupied	Width: 28 1/16inches Height: 78 1/2 inches Depth: 46 inches
Inside Clearance - Less Rails
Width	23 5/8 inches
Height	78 inches
Depth	See racking spec's - useable depth chart above
Ratings
NEMA	Class 250 Type 4X
Paint Tested	500 Hour salt spray 500 hour immersion
Warranty
Period	15 Years - Unconditional

R-2-78:	Two extra 78" rails and mounting hardware
MTDDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware

Air Conditioners	view all options
Heater Options	view all options
AC & DC Fan Kits	view all options

Standard

The OD-78DDX is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.