OEM / Vertical Rack Mount Enclosure Manufacturer  

Outdoor, Telcom, Traffic, Wimax, Security Enclosures
Nema 3, 3R, 4, 4X Cabinet Enclosures
800-753-8459
OPEN 8-12, 1-5 CST

Outdoor Enclosure / Cabinet 78"H x 25"D

(Click Below to Download Specs Sheet)
Download Now

OD-78DX

78"H X 25"W X 25"D (19" or 23" Racking)

OD-78DXC

78"H X 25"W X 25"D (19" or 23" Racking)

* Painted Cream

OEM Nema Outdoor Cabinet Enclosure Manufacture. Providing Adjustable 19" or 23" Racking. Front and Rear Doors with 3 Point Locking Sytem, NEMA 4, 4X. Air Condtioner's, Heaters, Fans, Batteries, Power options available

Features

Alumishield
Top cover, shades cabinet from the sun
Handles
Stainless steel - NEMA
Rails
Fully adjustable & alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
Vents
Front & rear, top & bottom, filters supplied

Specifications

General

Weight
168 lbs. assembled
208 lbs. Shipping weight
Doors
Two - secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets
Material
.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous
Vents
30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover
Handles
Stainless steel
Exterior Screws
Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails
One Set Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
78 inches
Useable Depth
Maximum: 21 1/2 " Minimum: 19 3/4" (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 74.75" - 78.00" 3.25" 21.50"
74.57" - 74.75"  .18" 20.50"
45.00" - 74.57" 29.57" 21.50"
       
Center 33.00" - 45.00" 12.00" 19.75"
       
3.43" - 33.00" 29.57" 21.50"
3.25" - 3.43"  .18" 20.50"
Bottom 0.00" - 3.25" 3.25" 21.50"
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (78.00")

Door Opening Clearance

Height
73 13/16 inches
Width
19 1/2 inches

Exterior Cabinet Dimensions

Main Body
Width: 25 1/2 inches
Height: 78 1/4 inches
Depth: 25 1/4 inches
Alumishield
Width: 28 1/16 inches
Hang down height: 1 3/4 inches
Depth: 27 11/16 inches
Handles
Protrude 1 7/8 inches
Total Space Occupied
Width: 28 1/16inches
Height: 78 1/2 inches
Depth: 29 inches

Inside Clearance - Less Rails

Width
23 5/8 inches
Height
78 inches
Depth
See racking spec's - useable depth chart above

Ratings

NEMA

Class 250 Type 4X

Paint Tested
500 Hour salt spray
500 hour immersion

Warranty

Period
15 Years - Unconditional

Accessory Options

R-2-78:
Two extra 78" rails and mounting hardware
MTDX:
Mounting tray
CA-4:
Caster kit (4) & mounting hardware

Climate Control Options

Air Conditioners
Heater Options
AC & DC Fan Kits

Shipping Information

Standard
The OD-78DX is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.
Please Fill out Info Sheet and a
Sales Rep will Contact you Immediately

Request Quote or More Information

Full Name:
(ex: Joe Smith)
Email:
Phone #:
(ex: 585-555-1212)
Company:
Question / Comment: