Outdoor Enclosure / Cabinet 54"H x 25"D

	4000 BTU 220 VOLTS W/ 400 WATTS HEAT 100 AMP Main w/ Electrical w/ Twist Lock Ext. Generator Plug Door Alarm Swith's Flourescent Light Spool-Up Side Box Ground Bar R3.3 Insulation
OOD-54DX-GP-42 54"H X 25"W X 25"D (19" Racking)
Request Quote or More Info OEM Nema Outdoor Cabinet Enclosure Manufacture. Providing Adjustable 19" or 23" Racking. Front and Rear Doors with 3 Point Locking System, NEMA 4, 4X. Air Conditioner's, Heaters, Fans, Batteries, Power options available

Alumishield	Top cover, shades cabinet from the sun
Handles	Stainless steel - NEMA
Rails	Centered & alodine coated
Doors	Front and rear secured with three point locks and padlocking handles

General
Weight	270 lbs. assembled 305 Lbs. Shipping weight
Doors	Two - secured by three point locking system Locks via customer supplied padlocks sealed with 13/16" aluminum filled gaskets
Material	.125 ALUMIFLEX Finish: Flat aluminum RF properties: Non-ferrous
Handles	Stainless steel, padlocking
Exterior Screws	Stainless steel with NEMA washers & nylon locking nuts
Racking Specifications
Rails	Two standard - (Set to Center)(For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by three R-STRUTS .125 material (ALUMIFLEX)
Spacing	19" EIA STANDARD
Positioning	All rails fully adjustable from front to rear
Useable Height	54 inches
Useable Depth	Maximum: 21 1/2" Minimum: 19 3/4" (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section Top 46.75" - 54.00" 3.25" 21.50" 46.57" - 46.75"  .18" 20.50" 31.00"- 46.57" 15.57" 21.50"         Center 19.00"-31.00" 12.00" 19.75"         3.43" - 19.00" 15.57" 21.50" 3.25" - 3.43"  .18" 20.50" Bottom 0.00" - 3.25" 3.25" 21.50" *Section measurements start from the bottom of the cabinet (0.00") & run vertically upward towards the top of the cabinet (50.00")
Door Opening Clearance
Height	50 13/16 inches
Width	19 1/2 inches
Exterior Overall Dimensions
Main Body	Width: 45 inches Height: 54 1/4 inches Depth: 25 1/4 inches
Alumishield	Width: 28 inches Hang down height: 1 3/4 inches Depth: 27 1/2 inches
Handles	Protrude 1 7/8 inches
Total Space Occupied	Width: 28 inches Height: 54 1/2 inches Depth: 29 inches
Inside Cabinet Clearance - Less Rails
Width	23 5/8 inches
Height	54 inches
Depth	See racking spec's - useable depth chart above
Spool Up Side Box
Dimensions	26"H X 22"W X 10"D
Security	2 Quarter turns Screwdriver Locks
Constructed	Out of .125 ALUMIFLEX Continuously welded on all seams
Nema	Weatherproof aluminum filled gasket seals top lid
Finish	Polished unpainted aluminum
Plate	1/2" Plywood Removable Plate
Ground Bar	1/4"x2"x10" Includes 10 pairs of 7/16" pre-drilled universal lug holes
Air Conditioner
Size	4000 BTU
Voltage	220 Volts AC
Dimensions	30.1”H x 12.27” W x 8.34”D
Security	Programable
Constructed	Durable 16 gauge welded steel construction
Nema	Optional 4, 4X class & divisional
Ratings
NEMA	Class 250 Type 4X
Warranty
Period	15 Years - Unconditional

R-2-50:	Two extra 50" rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
SCR-432:	Rail Screws (4) 10x32

Air Conditioners	view all options
Heater Options	view all options
AC & DC Fan Kits	view all options

Standard

The OOD-54DX-GP-42 is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.