Outdoor Enclosure / Cabinet 10 "H x 20"D

 
P2D-102120 (Front and Rear Door)
10"H X 21"W X 20 "D (19" Racking) * UnPainted
 
OP2D-102120FT = (FT) Adds 110v FAN W/ THERMOSTAT (OPTIONAL)

 

The P2D-102120 is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The P2D-102120 offers the protection needed for any severe outdoor environment. The P2D-102120 is constructed of .125 ALUMIFLEX material, . The P2D-102120, made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the P2D-102120 is the ultimate solution.

Features

Rails
Fixed & Alodine coated
Doors
Front and rear secured with 1/4 Turn Lock
Filtered Vents
One Front Right and One Back Left
(FT) Option / Fan w/ Thermostat
1 - 110 Volt Fan w/ Thermostat for Air Flow
Rails
1 set of 19" rails standard

Specifications

General

Weight
28 Lbs. assembled
35 Lbs. Shipping weight
Material
.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous
Vents
7 Louvers per side
14 Vent Total

Racking Specifications

Rails
One standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
.125 Material (ALUMIFLEX)
Spacing
19" EIA STANDARD
Positioning
Rails are adjustable 2", can be fliped for further depth
Useable Height
10 inches
Useable Depth
Maximum: 20

Door Opening Clearance

Height
9 3/4 inches
Width
21 inches

Exterior Cabinet Dimensions

Main Body
Width: 21 1/4 inches
Height: 10 1/4 inches
Depth: 20 inches
Mountinf Bars
2 = 18"H // Welded to Sidewall of Enclosure, 1 3/4" C-Channel
C-Channels Spaced 14 inches apart /
12 1/4 inches Center hole to Center Hole
Door Dimensions
Width: 22 inches
Height: 11 inches
Total Space Occupied
Width: 23 1/2 inches
Height: 11 inches
Depth: 21 inches

Inside Clearance - Less Rails

Width
20 1/2 inches
Height
10 1/4 inches
Depth
See racking spec's - useable depth chart above

Ratings

NEMA
Class 250 Type 4

Warranty

Period
15 Years - Unconditional
 

Accessory Options

SCR-432:
Rail Screws (4) 10x32

Climate Control Options

Heater Options
AC & DC Fan Kits

Shipping Information

Standard
The P2D-102120 is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.