General |
| Weight |
79 Lbs. |
| Doors |
Two - secured with non-intrusion locks
Locks and unlocks with a supplied set of keys
Designed to mount either left or right |
| Material |
.1 ALUMIFLEX (our own aluminum recipe)
Finish: Cream, textured, powder baked on paint
RF properties: Non-ferrous |
| Vents |
Two - 8" X 10" standard filter panel housings
One removable filter panel per door
Solid panels can be used for non ventilation |
| Access Holes |
One - One inch hole / with hole plug installed |
| Exterior Screws |
Stainless with nylon locking nuts |
Racking Specifications |
| Rails |
Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to accept standard 1032 screws
Each rail supported by two R-STRUTS
.125 material (ALUMIFLEX) |
| Spacing |
19" EIA STANDARD |
| Positioning |
All rails fully adjustable from front to rear |
| Useable Height |
42 inches |
| Useable Depth |
Maximum: 24 11/16" Minimum 22 15/16" (see below) |
|
*Section Starting & Ending Points |
Vertical Height Per section |
Effective Depth For Each Section |
| Top |
40.32"- 42.00" |
1.68" |
22 15/16" |
|
25.00" - 40.32" |
15.32" |
24 11/16" |
| |
|
|
|
| Center |
17.00" - 25.00" |
8.00" |
24 3/16" |
| |
1.68" - 17.00" |
15.32" |
24 11/16" |
|
|
|
|
| Bottom |
0.00" - 1.68 |
1.68" |
22 15/16" |
*Section measurements start from the bottom of the cabinet (0.00")
& run vertically upward towards the top of the cabinet (42.00") |
Door Opening Clearance |
| Height |
38 3/4 inches |
| Width |
19 1/2 inches |
Exterior Cabinet Dimensions |
| Main Body |
Width: 23 1/4 inches
Height: 42 1/4 inches
Depth: 25 1/4 inches |
| Screws |
Protrude 3/16 on each side |
| Total Space Occupied |
Width: 23 5/8 inches
Height: 42 1/4 inches
Depth: 25 3/8 inches |
Inside Clearance - Less Rails |
| Width |
21 3/16 inches |
| Height |
42 inches |
| Depth |
See racking spec's - useable depth chart above |
Ratings |
| NEMA |
Class 250 Type 2 |
| Paint Tested |
500 Hour salt spray
500 hour immersion |
Warranty |
| Period |
Seven Years - Unconditional |
