General |
| Weight |
21 lbs. |
| Material |
.125 ALUMIFLEX (Our own aluminum recipe)
RF properties: Non-ferrous |
| Vents |
Battery section: Has four vent louvers in bottom
Radio section: None
I/O section: None |
| Top Lid & Front Door |
Secured with a hasp locking system
Locks via customer supplied padlock
Sealed with aluminum filled gasket |
| Mounting |
Four 5/16" holes provided for wall mounting |
| Center divider wall (Power feed thru) |
Has two 1/4" holes in the top of wall, which provide access for two bolts and two rubber grommets. These allow your battery + & - to be passed thru from the battery section to the radio section |
Exterior Cabinet Dimensions |
| Main Body |
Width: 14 3/4 inches
Height: 13 7/8 inches
Depth: 14 1/4 inches |
| Top Lid |
Width: 15 1/8 inches
Height: 1 inch
Depth: 15 3/4 inches |
| Top Lid Hasp |
Protrudes through door: 5/16" inch
Very tight fitting: Holds door closed against gasket |
| Total Space Occupied |
Width: 15 1/8 inches
Height: 14 3/16 inches
Depth: 15 3/4 inches |
Battery Usable Clearance |
| Width |
14 inches |
| Height |
13 1/2 inches |
| Depth |
7 1/2 inches |
Radio Section Usable Clearance |
| Width |
12 1/4 inches |
| Height |
13 1/2 inches |
| Depth |
5 5/8 inches |
Radio Section |
| Mounting Slot |
Width: 3/16" Length: 6 3/4" (cut out of floor) |
| Antenna hole |
3/4" hole cut into top lid above radio section |
I/O Section Wiring Space |
| Width |
3 7/8 inches |
| Height |
10 7/8 inches |
| Depth |
1 1/2 inches |
Ratings |
| NEMA |
Class 250 Type 3R |
| Painted Tested |
500 Hour Salt Spray
500 Hour immersion |
Warranty |
| Period |
Seven Years - Unconditional |
