800-753-8459

Direct: 405-665-2876

8:00 am - 5:00 pm CST

LiveZilla Live Help

OEM / Vertical Rack Mount Enclosure Manufacturer

LTE, 4G,Wimax, Telecom, Security, Traffic, OSP

Outdoor NEMA 3, 3R, 4, 4X Cabinet Enclosures

Cage Code 385Y5    ISO 9001 Certified

30″H X 59″W X 42″D (60 RU) Double Bay Outdoor Enclosure

 

This Double Bay Design is 30″ High and 59″ Wide and 42″ Deep. It comes with Four Sets of Standard 19″ or 23″ 15RU (60 RU’s Total) Racking Rails w/ RU Markings. Low Profile Racking Hubs that will allow you side by side, double racking bays.Nema Outdoor Wireless LTE/4G/Wimax Double Bay Racking Enclosure

View Other Photos of Double Door Enclosures CLICK HERE

2OD-30DDXC

  • 60 Racking Units Total
  • 4 sets of Adjustable 19″ or 23″ Racking Rails
  • w/ RU Markings and Passthru Holes
  • Powder Baked on Textured Cream Paint
  • 2 Front and 2 Rear Doors
  • 3 Point Padlocking
  • Heavy Duty Lifting Hooks
  • Door Windlocks
 
(CLICK ON TABS BELOW FOR MORE INFO)

Specifications – 2OD-30DDXC – 30″H X 59″W X 42″D (60 RU) Double Bay Outdoor Enclosure

Weight
275 lbs. Assembled
340 lbs. Shipping weight
Doors
Four – secured by three point locking system Locks via customer supplied padlocks Sealed with 13/16″ aluminum filled gaskets
Material
.125″ Alumiflex® Finish: Flat aluminum RF properties: Non-ferrous
Vents
Thirty bottom louvers per door 20 top louvers – In top cover-under Alumishield® One removable filter panel per door 20 fixed filter pads in top cover
Handles
Stainless steel
Lifting Hooks
Four Standard
Exterior Screws
Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails
Four sets standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by three R-STRUTS™ .125″ Alumiflex®
Rails will have the face utilizing 19” racking and the mounting side to utilize 23” racking. The left rail (19” rack showing) will have two ground studs attached to the mounting face coming inward. There will be a hole at the top of each face of each rail for an optional ground strap. Rack units will be marked with etching depicting each RU and will have both a hole and etching separating each RU. The rails will be adjusted to fit inside an 2OD cabinet that has an extra 4” width. The mounting holes will be adjusted to fit the new r-strut configuration. There will be 1.75″ passthrough holes between the RU-03 and the RU-04 marks on the face with the 23″ racking. Another 1.75″ passthrough will be on the face with the 19″ racking between the RU-04 and the RU-05 marks. Use Heyco 28882 snap bushing or equivalent in the 1.75″ cable passthrough holes. Hash Marks will seperate the RU’s.
Spacing
19″ EIA Standard
Positioning
All rails fully adjustable from front to rear
Useable Height
Useable Racking Height Has Been Revised to Only Fit in the Opening of the Door Jam. Which is Cabinet Height Minus 3.75”
Maximum: 26.25″
Total # of Rack Units: 60 15 RU’s per Rail Set
Useable Depth
Maximum: 30.5” Minimum: 28.75″

Door Opening Clearance

Height
26.75″
Width
23.625″

Exterior Cabinet Dimensions

Main Body
Height: 30.98″ Width: 59″,Total Occupied w/Mounting Feet Width 65.0” Depth: 42″
Total Space Occupied
Height: 31.605″ Width: 65″ Depth: 45.75″
Handles
Protrude 1 7/8″
Total Space Occupied
Height: 31.605″ Width: 65″ Depth: 45.75″

Inside Clearance – Less Rails

Height
30″
Width
26.6875″ Each Compartment
Depth
See racking specs – useable depth above

Ratings

NEMA Class Types Available Class 250 // 3R (Vented) // 4 (closed loop-a/c) // 4X
Paint Tested
1000 Hour salt spray
1000 Hour immersion

Warranty

Period
15 Years – Unconditional

Features

Alumishield®
Top cover, shades cabinet from the sun
Handles
Stainless steel – NEMA
Rails
Fully adjustable & Alodine coated
Doors
Front and rear secured with three point locks and padlocking handles
Vents
Front & rear, top & bottom, filters supplied
More Info
This is made possible with our own aluminum recipe called Alumiflex®. It offers the protection needed for any severe outdoor environment. It’s constructed of .125″ Alumiflex® material and comes with an additional .125” Alumishield® top cover, thereby fully protecting your equipment from falling ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. It’s made of Alumiflex®, will operate without affecting, or being affected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today’s complicated zoning requirements. So whether you’re installing a new shelter or adding room to your existing one, It’s the ultimate solution. It’s the superior design in communication cabinets, being as rigid as steel and yet noticeably lighter than the old heavy steel constructed cabinets

Accessory Options

(C)
Powder baked on textured paint
R-2-30:
Two extra 30″ rails and mounting hardware
Load Centers
60 – 100 Amp Mains w/ 2 Populated 4 Square Outlets
Comb Locks
Short/Long Shanks Comb Locks
MTDDX:
Mounting tray
CF-4:
Two 4″ C-Chan. Feet 25″ Long
SMT-17FT9:
990 CFM 110v Dual Rail Fan Mounting Tray
Doors Alarms:
NO/NC Door Contacts

POP2 Options

POP2-1
  • 2 = 8000 BTU Air Conditioner, 220 Volts with 400 Watts Total Fan Heaters (12K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 10″D
  • LC-100 100 Amp Main Load Center w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
POP2-2
  • 2 = 8000 BTU Air Conditioner 220 Volts with 800 Watts Total Fan Heaters (16K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
POP2-3
  • 2 = 6000 BTU Air Conditioner, 220 Volts with 400 Watts Total Fan Heaters (12K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
  • 2 Seperate Battery Compartment Tray’s for a 2OD
POP2-4
  • 2 = 8000 BTU Air Conditioner 220 Volts with 800 Watts Total Fan Heaters (16K Total BTU)
  • Spool-Up Side Box 26″H X 22″W X 20″D
  • LC-100 100 Amp Main Load Center w/ (4) 4-Square Outlets, (1) 220V Outlets
  • 2 Fluorescent Lights
  • Lifting Hooks
  • Door Windlocks
  • Door Alarms
  • Battery Box
  • 2 Seperate Battery Compartment Tray’s for a 2OD

Climate Control Options

Air Conditioners
Heater Options
AC & DC Fan Kits

Shipping

Standard The 2OD-30DDXC is shipped fully assembled.
 

Climate Control  •  Power Distribution  •  Enclosure Construction

DDB Unlimited is an OEM NEMA Outdoor Cabinet Enclosure Manufacturer. We provide a large variety of standard enclosure from 16"-90"H and 25"-42"D. Equipped with adjustable and reversible EIA 19"/23" racking Rails, Front and Rear Doors with 3 Point Pad Locking Handles, NEMA 4, 4X. Air Conditioners ,Heaters, Fans , Batteries and Power options are available. Very Large Inventory and Fast Lead Times.

Configuration  •  Customization  •  Accessories  •  Customer Service