Top cover, shades cabinet from the sun

Stainless steel – NEMA

Fully adjustable & Alodine coated

2 Front and 2 rear secured with three point locks and padlocking handles

480 lbs. assembled
600 lbs. Shipping weight

Four – secured by three point locking system
Locks via customer supplied padlocks
Sealed with 13/16″ aluminum filled gaskets

.125″ Alumiflex™
Finish: Flat aluminum
RF properties: Non-ferrous

Thirty bottom louvers per door
20 top louvers – In top cover-under Alumishield™
One removable filter panel per door
20 fixed filter pads in top cover

Stainless steel

Four Sets Standard (For additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS™
.125″ Material (Alumiflex™)

Rails will have the face utilizing 19” racking and the mounting side to utilize 23” racking. The left rail (19” rack showing) will have two ground studs attached to the mounting face coming inward. There will be a hole at the top of each face of each rail for an optional ground strap. Rack units will be marked with etching depicting each RU and will have both a hole and etching separating each RU. The rails will be adjusted to fit inside an OD cabinet that has an extra 4” width. The mounting holes will be adjusted to fit the new r-strut configuration. There will be 1.75″ passthrough holes between the RU-03 and the RU-04 marks on the face with the 23″ racking. Another 1.75″ passthrough will be on the face with the 19″ racking between the RU-04 and the RU-05 marks. Use Heyco 28882 snap bushing or equivalent in the 1.75″ cable passthrough holes. Hash Marks will seperate the RU’s.

19″ EIA Standard

All rails fully adjustable from front to rear

73.5″

Height: 78″

Width: 59.5″

Total Occupied w/Mounting Feet Width 65.0”

Depth: 42″

Hang down height: 1.75″
Width 62.875″

Depth: 44 .95″

Protrude 1 7/8″

Powder baked on textured cream paint

Two extra 78″ rails and mounting hardware

Mounting tray

Caster kit (4) & mounting hardware

• 2 = 8000 BTU Air Conditioner, 220 Volts with 400 Watts Total Fan Heaters (12K Total BTU)
• Spool-Up Side Box 26″H X 22″W X 10″D
• LC-100 100 Amp Main Load Center w/ (4) 4-Square Outlets, (1) 220V Outlets
• 2 Fluorescent Lights
• Lifting Hooks
• Door Windlocks
• Door Alarms

• 2 = 8000 BTU Air Conditioner 220 Volts
  with 800 Watts Total Fan Heaters (16K Total BTU)
• Spool-Up Side Box 26″H X 22″W X 20″D
• LC-100 100 Amp Main Load Center
  w/ (4) 4-Square Outlets, (1) 220V Outlets
• 2 Fluorescent Lights
• Lifting Hooks
• Door Windlocks
• Door Alarms

• 2 = 6000 BTU Air Conditioner, 220 Volts
  with 400 Watts Total Fan Heaters (12K Total BTU)
• Spool-Up Side Box 26″H X 22″W X 20″D
• LC-100 100 Amp Main Load Center
  w/ (4) 4-Square Outlets, (1) 220V Outlets
• 2 Fluorescent Lights
• Lifting Hooks
• Door Windlocks
• Door Alarms
• 2 Seperate Battery Compartment Tray’s for a 2OD