This is one of our top of the line enclosures that we manufacture and this assembly is one of the hottest selling assemblies that we sell. It comes with (2) sets 19″ EIA racking rails with 27RU of available vertical rack space.  A 6000 BTU air conditioner for cooling with 400 watts of heat when needed; R3.3 closed cell foam insulation is included also. Above door fluorescent lighting is made available. Has a NO/NC door alarm switches for intrusion notification.  A spool-up side box for fiber or cable spooling is included with a copper ground bar on insulators inside the spool-up box. A separate battery compartment below the equipment space is available for all your battery applications and more.  The assembly is ETL certified to UL standard 60950-1.

• NEW REVISION AS OF 4/18/2012
• Total Occupied Space 80.625″H x 35.5″W x 44.15″D
• Top Compartment: 48.6″H // Dual Bottom Compartment:  25.875″H (12.82”H in each Battery Section)
• **To Accommodate our Large Amp Batteries** VBB-M12V155FT or VBB-M12V180FT

• Outdoor Enclosure with Front and Rear Door
• Useable Depth: Maximum: 30 1/2”, Minimum: 28 3/4″
• Front and Rear sets of Adjustable 19” or 23” racking
• (2) Sets of  27 Vertical Racking Units in Top Compartment
• Racking Rails 48.72″H / Tapped 10/32, / (2) Cable Pass Through Holes
• 27 Racking Units Total / Rail Set
• Heavy Duty Lifting Hooks
• Powder Baked White with Texture
• Air Conditioned Top Compartment (NEMA 4) and Fan cooled Battery Compartment (NEMA 3R) using (2) 5”, 48v, 110cfm fans and thermostat
• 45”H x 26”W x 10”D Side box with removable plywood back-plate with a total of (5) 2” cable pass through openings; (4) for the primary compartment and (1) for the battery cables
• 12” Copper ground bar on 14” risers and isolators
• Dual panel AC load center with 50amp back-up generator plug. Interior convenience outlets and 220V supplied junction box for DC power back up system. See electrical layout.
• HVAC unit is a 6000 BTU, 220V programmable AC unit with 400 watts of heat