This is one of our Top of the line Enclosure that we Manufacture and this Assembly is one of the hottest selling assembly’s that we sell. Comes with 19″ EIA Center Mount Racking with 27 Racking Units.  A 600 CFM Fanu Unt for Cooling with 300 Watt Heater, R3.3 Insulation glued inside Enclosure, also has a Flourescent Light Installed on inside top Roof by the Front Door.  Has NO/NC Door Alarm Switch’s for notifactaion.  A Spool Up Side Box for Fiber or Cable Spooling and a Ground Bar on Insulators inside Spool Up Box. Seperat Battery Compartment for your battery appications and more.  It is UL Listed and ETL Certified.

• Outdoor Enclosure with Front and Rear Door
• Total Occupied Space: 78.75″H x 28.5W x 36.7″D
• Top Compartment: 49.56″H,
• Bottom Compartment: 25.69″H
• Useable Depth: Maximum: 30.5” Minimum: 28.75″
• Front and Rear sets of Adjustable 19” or 23” racking.
• Racking Rails 48.72″H / Tapped 10/32, / (2) Pass Thru Holes.
• Heavy Duty Lifting Hooks.
• Powder Baked on Textured White Paint.
• HT-300 300 Watt Heater Strip 110 Volts
• Dual compartment design, 600 cfm direct air cooled (DAC) top compartment and fan cooled battery compartment using (2) 5”, 48v, 110cfm fans and thermostat.
• 45”H x 26”W x 10”D Side box with removable plywood back-plate with a total of (5) 2” cable pass through openings; (4) for the primary compartment and (1) for the battery cables.
• 12” Copper ground bar on 14”risers with isolators.
• Dual panel AC load center with 50amp back-up generator plug. Interior convenience outlets and 220V supplied junction box for DC power system. See electrical layout.
• DAC (direct air cooled) system is driven by a 10” diameter, 600 cfm, 48v fan drawing air through a 2” thick MERV 16, GR-487 Salt Fog filter.