« PREV: R7-30DXCW (Single Compartment / HVAC Cooled)

NEXT: R7-54DXCW-ACD (Single Compartment / HVAC Cooled) »

R7-54DXW-ACD Painted White (S Compartment w/ HVAC)

R7-54DXW-ACD (230V)

UL & CSA certified
54″H X 37″W X 36″D
Standard EIA 19″ Racking
29 Racking Units (RU)
5500 BTU 230Volt with 400 Watts of Heat
Ext. Generator Plug
Door Alarm Switches
Fluorescent Light
Spool-Up Side Box
Ground Bar
R3.3 Insulation
R7-54DXW-ACD-120V = 120 Volt version
Powder Baked on Textured White Paint

ETL Certified UL Certified

This is one of our Top of the line Enclosure that we Manufacture and this Assembly is one of the hottest selling assembly’s that we sale. Comes with 19″ EIA Center Mount Racking with 29 Racking Units. A 5500 BTU Aicondtioner for Cooling with 400 Watts of Heat when needed, R3.3 Insulation glued inside Enclosure, also has a Flourescent Light Installed on inside top Roof by the Front Door. Has NO/NC Door Alarm Switch’s for notifactions. A Spool Up Side Box for Fiber or Cable Spooling and a Ground Bar on Insulators inside Spool Up Box. This Enclosure Assembly is Powder Baked with Textured White Paint. It is UL Listed and ETL Certified.

(CLICK ON TABS BELOW FOR MORE INFO)

Slide 1

Features
Alumishield™	Top cover, shades cabinet from the sun
Handles	Stainless steel – NEMA
Rails	Fully adjustable & Alodine coated
Doors	Front and rear secured with three point locks and padlocking handles

Slide 2

Specifications

Weight

270 lbs. assembled
305 lbs. Shipping weight

Doors

Two – secured by three point locking system
Locks via customer supplied padlocks
sealed with 13/16″ aluminum filled gaskets

Material

.125″ Alumiflex™
Finish: Powder Baked on Textured White Paint
RF properties: Non-ferrous

Handles

Stainless steel, padlocking

Exterior Screws

Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails

Two standard – (Set to center, for additional rails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS™
” material (Alumiflex™)

Spacing

19″ EIA Standard

Positioning

All rails fully adjustable from front to rear, (Not Including Positioning of Outlets)

Useable Height

54″

Useable Depth

Maximum: 21 1/2″ Minimum: 19 3/4″ (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	46.75″ – 54.00″	3.25″	21.50″
	46.57″ – 46.75″	.18″	20.50″
	31.00″- 46.57″	15.57″	21.50″
Center	19.00″-31.00″	12.00″	19.75″
	3.43″ – 19.00″	15.57″	21.50″
	3.25″ – 3.43″	.18″	20.50″
Bottom	0.00″ – 3.25″	3.25″	21.50″

*Section measurements start from the bottom of the cabinet (0.00″)
& run vertically upward towards the top of the cabinet (50.00″)

Door Opening Clearance

Height

50 13/16″

Width

19 1/2″

Exterior Cabinet Dimensions

Main Body

Height: 54 1/4″
Width: 25 1/2″
Depth: 25 1/4″

Alumishield™

Width: 28″
Hang down height: 1 3/4″
Depth: 27 1/2″

Handles

Protrude 1 7/8″

Total Space Occupied

Height: 54 1/2″
Width: 37″
Depth: 36″

Inside Clearance – Less Rails

Width

23 5/8″

Height

54″

Depth

See racking specs – useable depth chart above

SPOOL UP SIDE BOX

Dimensions

26″H X 22″W X 10″D

Security

2 Quarter Turn Screwdriver Locks

Construction

.125″ Alumiflex™ Continuously welded on all seams

NEMA

Weatherproof aluminum filled gasket seals top lid

Finish

Powder Baked on Textured White Paint

Plate

1/2″ Plywood Removable Plate

Ground Bar

1/4″x2″x10″ Includes 10 pairs of 7/16″ pre-drilled universal lug holes

Air Conditioner

Size

5500 BTU / w 400 Watts of Internal Heat

Voltage

220 Volts AC

Dimensions

30.09″H X 12.27″W X 10.39″D

Security

Programmable

Construction

Durable 16 gauge welded steel construction

NEMA

Optional 4, 4X class & divisional

Ratings

NEMA Class Types Available

Class 250 Type 4x

Warranty

Period

15 Years – Unconditional

Slide 3

Accessory Options
R-2-50:	Two extra 50″ rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
SCR-432:	Rail Screws (4) 10×32
(Optional) 48 VOLT POWER SUPPLY
1 – 19″ POWER SHELF MID MOUNT, REARWIRE SHELF, SINGLE AC INPUT W/ 2 BRK POSTIONS FOR BATTERY AND 20 GMT FUSE POSITION 1 – BC1000-AO1-10VV BASIC CONTROLLER W/ SNMP RJ45 ETHERNET PORT 4 – CBB020E 20 amp breaker, Bullet-nosed terminal w/electro-mechanical trip 2 – V1000A-VV Rectifier, 48V, 20A, internal fan cooled -40 to +75C 1 – Logo Blank Rectifier 1 – TEMPERATURE PROBE 1 – 10′ Alarm Cable Battery inter-cell cables Qty 3 and the Qty 2 = 4′ / one pos and one neg with single hole lugs on both ends. 1 – Battery Disconnect – Rack side rail mount 4 – NSB-100FT // 100 AMP HR // 12 VOLT BATTERY 1 – 16″ X 17″ CENTER RAIL MOUNT BATTERY TRAY 12 GA STEEL

Slide 4

Climate Control Options
Air Conditioners	view all options
Heater Options	view all options
AC & DC Fan Kits	view all options

Slide 5

Shipping Info
Standard	The is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.

800-753-8459