« PREV: 30″H X 17″D / Indoor Rackmount Enclosure

NEXT: 30″H X 34″D / Indoor Rackmount Enclosure »

30″H X 25″D / Indoor Rackmount Enclosure

ST-30DX

30″H X 23″W X 25″D
Adjustable 19″ Racking
Front and Rear Doors
Foam Filtered Vents
Powder Baked-On Cream Paint
Lockable

ST-30DX Specs Sheet

(CLICK ON TABS BELOW FOR MORE INFO)

Slide 1

Features
Design	Rounded corners
Paint	Scratch resistant, textured, powder baked on.
Rails	Fully adjustable & Alodine coated
Doors	Front and rear secured with Non-Intrusion locks.

Slide 2

Specifications

Weight

53 lbs.

Doors

Two – secured with non-intrusion locks, Locks and unlocks with a supplied set of keys, Designed to mount either left or right

Material

.1 Alumiflex® (our own aluminum recipe) Finish: Cream, textured, powder baked on paint RF properties: Non-ferrous

Vents

Two – 8″ X 10″ standard filter panel housings One removable filter panel per door Solid panels can be used for non ventilation

Access Holes

One – One inch hole / with hole plug installed

Exterior Screws

Stainless with nylon locking nuts

Racking Specifications

Rails

Two standard (For additional rails see accessories) Alodine coated Holes tapped to accept standard 1032 screws Each rail supported by two R-STRUTS™ ” material (Alumiflex®)

Spacing

19″ EIA Standard

Positioning

All rails fully adjustable from front to rear

Useable Height

30″

Maximum 12.75″

Total # of Racking Units:7

Useable Depth

Maximum: 24 11/16″ Minimum:22 15/16″ (see below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	28.32″- 30.00″	1.68″	22 15/16″
	19.00″ – 28.32″	9.32″	24 11/16″
Center	11.00″ – 19.00″	8.00″	24 3/16″
	1.68″ – 11.00″	9.32″	24 11/16″
Bottom	0.00″ – 1.68	1.68″	22 15/16″

Door Opening Clearance

Height

26 3/4″

Width

19 1/2″

Exterior Cabinet Dimensions

Main Body

Width: 23 1/4″ Height: 30 1/4″ Depth: 25 1/4″

Screws

Protrude 3/16 on each side

Total Space Occupied

Width: 23 5/8″ Height: 30 1/4″ Depth: 25 3/8″

Inside Clearance – Less Rails

Width

21 3/16″

Height

30″

Depth

See racking specs – useable depth chart above

Ratings

NEMA Class Types Available

Class 250 Type 2

Paint Tested

1000 Hour salt spray 1000 Hour immersion

Warranty

Period

15 Years – Unconditional

Slide 3

Accessory Options
STR-2-30:	Two extra 30″ rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
CL-4:	4 – Tinnerman Clips 10 x 24
C-17:	Trough top cover & 10″ fan access
SCR-432:	Rail Screws (4) 10×32

Slide 4

Climate Control Options
Air Conditioners	view all options
Heater Options	View all options
AC & DC Fan Kits	View all options

Slide 5

Shipping Info
Standard	The ST-30DX is shipped fully assembled, but can be easily knocked down and re-assembled at your site, if desired.

The ST-30DX is a new design on communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called Alumiflex®. The ST series are the most versatile cabinets in the market place today. Being designed for our continuously changing industry, the ST series is ahead of the competition in cost, weight, and expansion capabilities. Unlike the steel cabinets, our ST-30DX, made of Alumiflex®, will operate without affecting or being affected by RF influences. Order our ST-30DX, the new industry standard, and take care of today’s needs while at the same time preparing for tomorrow’s expansion requirements.

800-753-8459