ST-42D
- 42″H X 23″W X 17″D
- Adjustable 19″ Racking
- Front and Rear Doors
- Foam Filtered Vents
- Powder Baked-On Cream Paint
- Lockable
The ST-42D is a new design on communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called Alumiflex®. The ST series are the most versatile cabinets in the market place today. Being designed for our continuously changing industry, the ST series is ahead of the competition in cost, weight, and expansion capabilities.
Unlike the steel cabinets, our ST-42D, made of Alumiflex®, will operate without affecting or being affected by RF influences. Order our ST-42D, the new industry standard, and take care of today’s needs while at the same time preparing for tomorrow’s expansion requirements.
(CLICK ON TABS BELOW FOR MORE INFO)
- Slide 1
-
Features
|
| Design |
Rounded corners
|
| Paint |
Scratch resistant, textured, powder baked on.
|
| Rails |
Fully adjustable & Alodine coated
|
| Doors |
Front and rear secured with Non-Intrusion locks.
|
- Slide 2
-
Specifications
|
| Weight |
48 lbs.
|
| Doors |
Two – secured with non-intrusion locks
Locks and unlocks with a supplied set of keys
Designed to mount either left or right
|
| Material |
.1 Alumiflex® (our own aluminum recipe)
Finish: Cream, textured, powder baked on paint
RF properties: Non-ferrous
|
| Vents |
Two – 8″ X 10″ standard filter panel housings
One removable filter panel per door
Solid panels can be used for non ventilation
|
| Access Holes |
One – One inch hole / with hole plug installed
|
| Exterior Screws |
Stainless with nylon locking nuts
|
Racking Specifications
|
| Rails |
Two standard (For additional rails see accessories)
Alodine coated
Holes tapped to accept standard 1032 screws
Each rail supported by two R-STRUTS™
” material (Alumiflex®)
|
| Spacing |
19″ EIA Standard
|
| Positioning |
All rails fully adjustable from front to rear
|
| Useable Height |
|
42″
| Maximum 12.75″ |
Total # of Racking Units:7 |
|
|
| Useable Depth |
Maximum: 16 11/16″ Minimum:14 15/16″ (see below)
|
|
*Section Starting & Ending Points |
Vertical Height Per section |
Effective Depth For Each Section |
| Top |
40.32″- 42.00″” |
1.68″ |
14 15/16″ |
|
25.00″ – 40.32″ |
15.32″ |
16 11/16″ |
| Center |
17.00″ – 25.00″ |
8.00″ |
16 3/16″ |
|
1.68″ – 17.00″ |
15.32″ |
16 11/16″ |
| Bottom |
0.00″ – 1.68 |
1.68″” |
14 15/16″ |
|
Door Opening Clearance
|
| Height |
38 3/4″
|
| Width |
19 1/2″
|
Exterior Cabinet Dimensions
|
| Main Body |
Width: 23 1/4″
Height: 42 1/4″
Depth: 17 1/4″
|
| Screws |
Protrude 3/16 on each side
|
| Total Space Occupied |
Width: 23 5/8″
Height: 42 1/4″
Depth: 17 3/8″
|
Inside Clearance – Less Rails
|
| Width |
21 3/16″
|
| Height |
42″
|
| Depth |
See racking specs – useable depth chart above
|
Ratings
|
| NEMA Class Types Available |
Class 250 Type 2
|
| Paint Tested |
1000 Hour salt spray
1000 Hour immersion
|
Warranty
|
| Period |
15 Years – Unconditional
|
- Slide 3
-
Accessory Options
|
|
STR-2-42:
|
Two extra 42 ” rails and mounting hardware
|
|
MTD:
|
Mounting tray
|
|
CA-4:
|
Caster kit (4) & mounting hardware
|
|
CL-4:
|
4 – Tinnerman Clips 10 x 24
|
|
C-17:
|
Trough top cover & 10″ fan access
|
|
SCR-4:
|
Rail Screws (4) 10×32
|
- Slide 4
-
Climate Control Options
|
| Air Conditioners |
|
| Heater Options |
|
AC & DC
Fan Kits |
|
- Slide 5
-
Shipping Info
|
| Standard |
The ST-42D is shipped fully assembled, but can be easily knocked
down and re-assembled at your site, if desired. |
