NEXT: OOD-30DXC-B1AC1 46″H x 25″D / Outdoor Enclosure »

OOD-30DXC-B1 46″H x 25″D / Outdoor Enclosure

OOD-30DX-B1

OOD-30DX-B2*

OD-30DX (Top Enclosure)
30″H X 25″W X 25″D (Adjustable 19″ or 23″ Racking)
B1 = 1 BOD-DX (Battery Box) (Bottom Enclosure)
B2 = 2 BOD-DX (Battery Boxes) (Bottom Enclosure)
Outdoor Battery Box 16″H X 25″W X 25″D (Mounting Tray 2″H X 18.75″W X 20″D)
Populated 4 Square Outlet
*Painted Cream

OOD-30DXC-B1 Specs Sheet

(CLICK ON TABS BELOW FOR MORE INFO)

Slide 1

Features
Alumishield®	Top cover, shades cabinet from the sun
Handles	Stainless steel – NEMA
Rails	Fully adjustable & Alodine coated
Doors	Front and rear secured with three point locks and padlocking handles
Vents	Front & rear, top & bottom, filters supplied

Slide 2

Specifications

Weight

150 lbs. assembled 230 lbs. Shipping weight

Doors

Two – secured by three point locking system Locks via customer supplied padlocks sealed with 13/16″ aluminum filled gaskets

Material

.125” Alumiflex® Finish: Flat aluminum RF properties: Non-ferrous

BOD-DX

Battery Box Enclosure w/Slide-Out Battery Tray

Handles

Stainless steel, padlocking

Exterior Screws

Stainless with NEMA washers & nylon locking nuts

Racking Specifications

Rails

Two standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by two R-STRUTS™ .125″ Material (Alumiflex®)

Spacing

19″ EIA Standard

Positioning

All rails fully adjustable from front to rear

Useable Height

30″ (Top Enclosure)

Useable Depth

Maximum: 21 1/2″ Minimum: 19 3/4″ (See below)

Useable Racking Height Has Been Revised to Only Fit in the Opening of the Door Jam. Which is Cabinet Height Minus 3.75”

Maximum: 25 13/16″

Total # of Rack Units: 15

15 RU’s per Rail Set

Door Opening Clearance

Height

25 13/16″

Width

19 1/2″

Exterior Cabinet Dimensions

Main Body

Width: 25 1/2″ Height: 46 1/4″ Depth: 25 1/4″

Alumishield®

Width: 28 1/16″ Hang down height: 1 3/4″ Depth: 29″

Handles

Protrude 1 7/8″

Total Space Occupied

Width: 28 1/16″ Height: 46 1/2″ Depth: 29″

Inside Clearance – Less Rails

Width

23 5/8″

Height

30″

Depth

See racking specs – useable depth chart above

Ratings

NEMA Class Types Available

NEMA 3R (Vented), NEMA 4 (closed loop-a/c) , NEMA 4X

Paint Tested

1000 Hour salt spray 1000 Hour immersion

Warranty

Period

15 Years – Unconditional

Slide 3

Accessory Options
R-2-30:	Two extra 30″ rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware

Slide 4

Climate Control Options
Air Conditioners	View all options
Heater Options	View all options
AC & DC Fan Kits	View all options

Slide 5

Shipping Info
Standard	The OOD-30DX-B1 is shipped fully assembled, but can easily be knocked down and reassembled at your site, if desired.

800-753-8459