800-753-8459

8:00 am - 5:00 pm CST

ISO 9001 Certified

Cage Code 385Y5

LiveZilla Live Help

OEM / Vertical Rack Mount Enclosure Manufacturer

LTE, 4G,Wimax, Telecom, Security, Traffic, OSP

Outdoor NEMA 3, 3R, 4, 4X Cabinet Enclosures

54″H X 25″D LTE/4G Outdoor Enclosure w/AC 110 Volts & Side Box

OOD-54DX-GP-41

  • 54″H X 25″W X 25″D(19″ Racking)
  • 4000 BTU 110 Volts (-41=110 Volts) w/400 Watts Heat
  • Ext. Generator Plug
  • Door Alarm Switches
  • Fluorescent Light
  • Spool-Up Side Box
  • Ground Bar
  • R3.3 Insulation
spacer
It’s the superior design in communication cabinets, being as rigid as steel and yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called Alumiflex®. It offers the protection needed for any severe outdoor environment. It’s constructed of .125” Alumiflex® material and comes with an additional ” Alumishield® top cover, thereby fully protecting your equipment from falling ice and the sun’s heat penetration. Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel padlocking handles. It’s made of Alumiflex®, will operate without affecting, or being affected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today’s complicated zoning requirements. So whether you’re installing a new shelter or adding room to your existing one, It’s ultimate solution.

(CLICK ON TABS BELOW FOR MORE INFO)

Specifications

Weight
270 lbs. assembled 305 lbs. Shipping weight
Doors
Two – secured by three point locking system Locks via customer supplied padlocks sealed with 13/16″ aluminum filled gaskets
Material
.125” Alumiflex® Finish: Flat aluminum RF properties: Non-ferrous
Handles
Stainless steel, padlocking
Exterior Screws
Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails
Two standard – (Set to Center)(For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by three R-STRUTS™ .125” material (Alumiflex®)
Spacing
19″ EIA Standard
Positioning
All rails fully adjustable from front to rear
Useable Height
54″
Useable Depth
Maximum: 21 1/2″ Minimum: 19 3/4″ (See below)
*Section Starting & Ending Points Vertical Height Per section Effective Depth For Each Section
Top 46.75″ – 54.00″ 3.25″ 21.50″
46.57″ – 46.75″ .18″ 20.50″
31.00″- 46.57″ 15.57″ 21.50″
Center 19.00″-31.00″ 12.00″ 19.75″
3.43″ – 19.00″ 15.57″ 21.50″
3.25″ – 3.43″ .18″ 20.50″
Bottom 0.00″ – 3.25″ 3.25″ 21.50″
*Section measurements start from the bottom of the cabinet (0.00″) & run vertically upward towards the top of the cabinet (50.00″)

Door Opening Clearance

Height
50 13/16″
Width
19 1/2″

Exterior Cabinet Dimensions

Main Body
Width: 45″ Height: 54 1/4″ Depth: 25 1/4″
Alumishield®
Width: 28″ Hang down height: 1 3/4″ Depth: 27 1/2″
Handles
Protrude 1 7/8″
Total Space Occupied
Width: 28″ Height: 54 1/2″ Depth: 29″

Inside Clearance – Less Rails

Width
23 5/8″
Height
54″
Depth
See racking specs – useable depth chart above

SPOOL-UP SIDE BOX

Dimensions
26″H X 22″W X 10″D
Security
2 Quarter turns Screwdriver Locks
Constructed
Out of .125” Alumiflex® Continuously welded on all seams
NEMA
Weatherproof aluminum filled gasket seals top lid
Finish
Polished unpainted aluminum
Plate
1/2″ Plywood Removable Plate
Ground Bar
1/4″x2″x10″ Includes 10 pairs of 7/16″ pre-drilled universal lug holes

Air Conditioner

Size
4000 BTU
Voltage
110 Volts AC
Dimensions
30.1″H x 12.27″ W x 8.34″D
Security
Programmable
Constructed
Durable 16 gauge welded steel construction
NEMA
Optional 4, 4X class & divisional

Ratings

NEMA Class Types Available
Class 250 Type 4x

Warranty

Period
15 Years – Unconditional

Features

Alumishield®
Top cover, shades cabinet from the sun
Handles
Stainless steel – NEMA
Rails
Fully adjustable & Alodine coated
Doors
Front and rear secured with three point locks and padlocking handles

Accessory Options

R-2-54:
Two extra 50″ rails and mounting hardware
MTDX:
Mounting tray
CA-4:
Caster kit (4) & mounting hardware
SCR-432:
Rail Screws (4) 10×32

(Optional) 48 VOLT POWER SUPPLY

1 – 19″ POWER SHELF MID MOUNT, REARWIRE SHELF, SINGLE AC INPUT W/ 2 BRK POSTIONS FOR BATTERY AND 20 GMT FUSE POSITION 1 – BC1000-AO1-10VV BASIC CONTROLLER W/ SNMP RJ45 ETHERNET PORT 4 – CBB020E 20 amp breaker, Bullet-nosed terminal w/electro-mechanical trip 2 – V1000A-VV Rectifier, 48V, 20A, internal fan cooled -40 to +75C 1 – Logo Blank Rectifier
1 – TEMPERATURE PROBE 1 – 10′ Alarm Cable Battery inter-cell cables Qty 3 and the Qty 2 = 4′ / one pos and one neg with single hole lugs on both ends. 1 – Battery Disconnect – Rack side rail mount 4 – NSB-100FT // 100 AMP HR // 12 VOLT BATTERY 1 – 16″ X 17″ CENTER RAIL MOUNT BATTERY TRAY 12 GA STEEL

Climate Control Options

Air Conditioners
Heater Options
AC & DC Fan Kits

Shipping Info

Standard The OOD-54DX-GP-41 is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.
 

Climate Control  •  Power Distribution  •  Enclosure Construction

DDB Unlimited is an OEM NEMA Outdoor Cabinet Enclosure Manufacturer. We provide adjustable 19" or 23" racking, front and rear doors with 3 point locking system, NEMA 4, 4X, air conditioners, heaters, fans and batteries. Power options are available for our telecommunication enclosures.

Configuration  •  Customization  •  Accessories  •  Customer Service