NEXT: POD-16DXC 16″H x 25″W x 25″D (7 RU) Outdoor Enclosure »

16″H x 25″W x 25″D (7 RU) Outdoor Enclosure

The OD series outdoor enclosure is the ultimate choice for your outdoor racking requirements. Being made of our own Alumiflex®, you’ll find it noticeably lighter than steel, yet strong enough to rack even the heaviest equipment. Being designed to accommodate the weather protection of your choice, the OD series enclosures are available in NEMA 3R, 4, or 4X configurations. The additional Alumishield® (sun roof), provides superior solar protection with it’s large overhang roof design. Our own versatile strut system allows you to position the racking rails at any depth desired within the enclosure. You can rest assured your equipment is safe and secure as you pad lock the front and rear door handles, knowing they hold the three points locking system securely intact. The OD series enclosures are available in various heights and depths, and they are available in dual and triple bay versions as well. Our professional Sales staff and CAD-Engineering team are able to assist you with a state of the art design, a competitive price, and a guaranteed delivery.

OD-16DXC

16″H X 25″W X 25″D
Front and Rear Doors
Padlocking Handles
Adjustable 19″ or 23″ Racking Rails
Alumishield® Design
* (C) Painted Cream

OD-16DXC Enclosure (PDF)

OD Family Spec (PDF)

Wind Load Study (PDF)

Fan Kit Install Instructions (PDF)

(CLICK ON TABS BELOW FOR MORE INFO)

Specifications – OD-16DXC– 16″H X 25″W X 25″D (7 RU) Outdoor Enclosure

Weight

70 lbs. assembled 120 lbs. Shipping weight

Doors

Two – secured by three point locking system Locks via customer supplied padlocks Sealed with 13/16″ aluminum filled gaskets

Material

.125″ Alumiflex® Finish: Flat aluminum RF properties: Non-ferrous

Vents

Thirty bottom louvers per door Twelve top louvers – In top cover-under Alumishield® One removable filter panel per door Twelve fixed filter pads in top cover

Handles

Stainless steel, padlocking

Exterior Screws

Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails

One Set Standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by two R-STRUTS™ .125″ Material (Alumiflex®)

Spacing

19″ EIA Standard

Positioning

All rails fully adjustable from front to rear

Useable Height

Useable Racking Height Has Been Revised to Only Fit in the Opening of the Door Jam. Which is Cabinet Height Minus 3.75″

Maximum: 12 13/16″

Total # of Rack Units: 7

7 RU’s per Rail Set

Useable Depth

Maximum: 21 1/2 ” Minimum: 19 3/4″ (See below)

Door Opening Clearance

Height

12 1/2″

Width

19 1/2″

Exterior Cabinet Dimensions

Main Body

Width: 25 1/2″ Height: 16″ Depth: 25 1/4″

Alumishield®

Width: 28 1/4″ Hang down height: 1 3/4″ Depth: 27 3/4″

Handles

Protrude 1 7/8″

Total Space Occupied

Width: 28 1/4″ Height: 16 1/2″ Depth: 29″

Inside Clearance – Less Rails

Width

23 5/8″

Height

16″

Depth

See racking specs – useable depth chart above

Ratings

NEMA Class Types available

NEMA 3R (Vented), NEMA 4 (closed loop-a/c) , NEMA 4X

Paint Tested

1000 Hour salt spray (Textured) 1000 Hour immersion

Warranty

Period

15 Years – Unconditional

Features
Alumishield®	Top cover, shades cabinet from the sun
Handles	Padlocking Stainless steel – NEMA
Rails	1 Set of Fully Adjustable Alodine Coated 19″ EIA
Doors	Front and rear secured with three point locks and padlocking handles
Vents	Front, rear, top, and bottom, filters supplied.
Painted	Powder Baked-On Textured Cream

Accessory Options
F-25-115T:	Dual 110v Fan Kit w/ Thermostat 220 CFM
R-2-16:	Two extra 16 ” rails and mounting hardware
MTDX:	Mounting tray
CA-4:	Caster kit (4) & mounting hardware
SCR-432:	Rail Screws (4) 10×32

Climate Control Options
Air Conditioners	AC-1000I = 1000 BTU 110 OR 220 VOLTS
Heater Options	View all options
AC & DC Fan Kits	View all options

Shipping Info
Standard	The OD-16DXC is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.

800-753-8459