OEM / Vertical Rack Mount Enclosure Manufacturer

LTE, 4G,Wimax, Telecom, Security, Traffic, OSP

Outdoor NEMA 3, 3R, 4, 4X Cabinet Enclosures

Made in the USA • ISO 9001 • 15 year Warranty

16″H x 25″W x 34″D (7 RU*) Outdoor Enclosure

The OD series outdoor enclosure is the ultimate choice for your outdoor racking requirements. Being made of our own Alumiflex®, you’ll find it noticeably lighter than steel, yet strong enough to rack even the heaviest equipment. Being designed to accommodate the weather protection of your choice, the OD series enclosures are available in NEMA 3R, 4, or 4X configurations. The additional Alumishield® (sun roof), provides superior solar protection with it’s large overhang roof design. Our own versatile strut system allows you to position the racking rails at any depth desired within the enclosure. You can rest assured your equipment is safe and secure as you pad lock the front and rear door handles, knowing they hold the three points locking system securely intact. The OD series enclosures are available in various heights and depths, and they are available in dual and triple bay versions as well. Our professional Sales staff and CAD-Engineering team are able to assist you with a state of the art design, a competitive price, and a guaranteed delivery.

OD-16DDC

  • 16″H X 25″W X 34″D
  • 2 Sets of Adjustable 19” or 23” Racking Rails w/RU Markings and Pass-through Holes
  • Powder Baked on Textured Cream Paint
  • Front and Rear Doors
  • New Zinc Die Powder-coated Black EMKA Three Point Padlocking Handles
  • Heavy Duty Alumishield® Design

* Front and Rear sets of rails allow some equipment to rack both directions providing up to 14 RU

ETL Certified PriceMatch
spacer
(CLICK ON TABS BELOW FOR MORE INFO)

Specifications – OD-16DDC – 16″H X 25″W X 34″D (14 RU) Outdoor Enclosure

Weight
85 lbs. assembled
155 lbs. Shipping weight
Doors
Two – secured by three point locking system
Locks via customer supplied padlocks
Sealed with 13/16″ aluminum filled gaskets
Material
.125″ Alumiflex®
Finish: Flat aluminum
RF properties: Non-ferrous
Vents
Thirty bottom louvers per door Fourteen top louvers – In top cover-under Alumishield® One removable filter panel per door Fourteen fixed filter pads in top cover
Handles
Zinc Die Powder-coated Black EMKA Three Point Padlocking Handles
Exterior Screws
Stainless steel with NEMA washers & nylon locking nuts

Racking Specifications

Rails
2 Sets 19″ Rails Standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by two R-STRUTS™ .125″ Material (Alumiflex®)
Rail Pass-Through
Each rail has 1 pass-through hole with grommets. Holes are 1.75″ diameter
Spacing
19″ EIA Standard, 23″ Available
Positioning
All rails fully adjustable from front to rear
Useable Height
Useable Racking Height Has Been Revised to Only Fit in the Opening of the Door Jam. Which is Cabinet Height Minus 4.25″
Maximum: 12.75″
Total # of Rack Units: 14 7 RU’s per Rail Set
Useable Depth
Maximum: 30.5″ Minimum: 28.75″ (See below)

Door Opening Clearance

Height
12.75″
Width
19.5″

Exterior Cabinet Dimensions

Main Body
Height: 16″
Width: 25.5″
Depth: 34″
Alumishield®
Width: 28.46″
Hang down height: 1.71″
Depth: 36.67″
Handles
Protrude 2.2″
Total Space Occupied
Height: 17.605″
Width: 28.46″
Depth: 37.75″

Inside Clearance – Less Rails

Height
16.73″
Width
23.625″
Depth
See racking specs – useable depth chart above

Ratings

NEMA Class Types Available
NEMA 3R (Vented), NEMA 4 (closed loop-a/c) , NEMA 4X
Paint Tested
1000 Hour salt spray (Textured) 1000 Hour immersion

Warranty

Period
15 Years – Unconditional

Features

Alumishield®
Top cover, shades cabinet from the sun
Handles
Zinc Die Powder-coated Black EMKA Three Point Heavy Duty 1/4 Turn Padlocking Handles, NEMA 4 Rated
Rails
2 Sets of Fully Adjustable Alodine Coated 19″ EIA, W/ Pass Thru Holes and Etched RU Markings
Doors
Front and rear secured with three point locks and padlocking handles
Vents
3 Row / 30 Vents per Door, Vents on Top for Exhaust, All Vents are filters supplied.
Painted Powder Baked-On Textured Cream
Fans
New Roof Fan Design
Light
Fluorescent Light Modification
Wind Lock
Door Wind Lock Modification
Cross Alumishield®
Cross Raised Alumishield® (Coming Soon)

Accessory Options

F-25-115T:
Dual 110v Fan Kit w/ Thermostat 220 CFM
R-2-16:
Two extra 16 ” rails and mounting hardware
MTDD:
Mounting tray
CA-4:
Caster kit (4) & mounting hardware
SCR-432:
Rail Screws (4) 10×32

Climate Control Options

Air Conditioners
Heater Options
AC & DC Fan Kits

Shipping Info

Standard The OD-16DDC is shipped fully assembled, but can easily be knocked down and re-assembled at your site, if desired.
 




Climate Control    Power Distribution    Enclosure Construction

DDB Unlimited is an OEM NEMA Outdoor Enclosure Manufacturer. We provide a large variety of standard sizes from 16" to 90" high and from 25" to 42" deep with adjustable and reversible EIA 19"/23" racking rails, front and rear doors and 3 point, pad locking handles. Designed for the telecommunication industry, our enclosures can be deployed in harsh outdoor environments both rural or residential.

DDB manufactures a wide variety of NEMA 4 & 4x NEMA enclosures & offers accessories such as enclosure air conditioners, Heaters, Fans, Batteries and Power options. DDB's large stocked inventory allows for the industries fastest lead times, we offer quick and easy payment via credit cards & our enclosures are made in the USA. DDB is a ISO 9001 registered company.

Configuration    Customization    Accessories    Customer Service

 
 
 
 
 
 

JOIN OUR NEWSLETTER.

Sign up for emails to get the latest product info, specials, discounts and more.