OPSOD-192420-AC

  • 19″H X 24″W X 20″D
  • 19″ Racking Rails
  • New Emka 1/4 Turn Padlocking Handle
  • Pole or Wall Mountable
  • 800 BTU Air Condtioner 110v
  • 1/2″ Insulation
  • Rear Mounting Feet
  • NEMA 3R (Vented), NEMA 4 (closed loop-a/c) , NEMA 4X

PriceMatch

(CLICK ON TABS BELOW FOR MORE INFO)

[listmenu2 menu=Spec2]

Specifications

Raw Weight
74 lbs
Shipping Weight
109 lbs
Doors
Louvered 7.5 ” x 10″ 5 micron nylon filter Gasket filled rubber
Material
0.125″ Alumiflex® (non-corrosive) Powder-Coat Paint 3 step tiger drylac
Handles
Padlocking Handle

Exterior Cabinet Dimensions

Main Body
Height: 19″ Width: 24″ Depth: 20″

Inside Clearance – Less Rails

Height
17 1/4″
Width
22″
Depth
18″

Racking Specifications

Rails
One Set Standard (For additional rails see accessories) Alodine coated Holes tapped to 10 x 32 threads Each rail supported by slotted studs .125” material (Alumiflex®)
Spacing
19″ EIA Standard
Positioning
Inset 1 1/2″ from door with 1″ adjustability. Can be reversed for deeper inset ability.
Useable Height
19″
Useable Depth
Maximum: 21 1/2″ Minimum: 19 3/4″ (See below)

Exterior Mounting

C-Channel Feet
Height: 2″ Width: 4″ Length: 23 1/2″
Mounting Slots
Height: 1 inch
Width: 1/4 inch
Spacing
2 inch on center, 3/4 inch from end to center first slot

Warranty

Period
15 Years – Unconditional

Ratings

NEMA
Class 250 4X
Painted Tested
1000 Hour salt spray 1000 Hour immersion

Features

Standard
  • 800 BTU AIR CONDITIONER 110V
  • 1/2″ Insulation Installed (.5INS)
  • Electrical (2) 2″ x 4″ gang boxes with 2outlets each
  • 4 = RF knockouts .875″ dia. (for type N RF con) on floor of unit
  • Four Power knockouts ¾” dia. on floor of unit
  • Ground stud on floor of unit
  • Louvered 7.5 ” x 10″ 5 micron nylon filter / Removable Side Panel
  • 2 = 4″ C-Channel in Rear for Mounting with Slots

Accessory Options

Not Available

Climate Control Options

Air Conditioners
Heater Options
AC & DC Fan Kits

Shipping Info

Standard ?

 

Translate »